Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.2
Access Duration: 180 days
CCNP/CCIE Service Provider - Core
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.2
Continuing Education Credits: 64
Access Duration: 180 days
Overview
The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) training expands your knowledge and skills of service provider core networks.
Read moreYou will gain the theoretical and practical knowledge needed to implement and operate service provider networks using technologies such as core architecture, services, networking, automation, quality of service (QoS), security, and network assurance.
This training prepares you for the 350-501 SPCOR exam. If passed, you earn the Cisco Certified Specialist – Service Provider Core certification and satisfy the core exam requirement for the Cisco Certified Network Professional (CCNP) Service Provider and Cisco Certified Internetwork Expert (CCIE) Service Provider certifications.
Read lessCourse Objectives
- Describe the service provider network architectures, concepts, and transport technologies
- Describe the Cisco IOS software architectures, main internetwork operating system (IOS) types, and their differences
- Implement open shortest path first (OSPF) in the service provider network
- Implement integrated intermediate system to intermediate system (IS-IS) in the service provider network
- Implement border gateway protocol (BGP) routing in service provider environments
- Implement route maps and routing policy language
- Describe IPv6 transition mechanisms used in the service provider networks
- Implement high availability mechanisms in Cisco IOS XR software
- Implement traffic engineering in modern service provider networks for optimal resource utilization
- Describe segment routing and segment routing traffic engineering concepts
- Describe the virtual private network (VPN) technologies used in the service provider environment
- Configure and verify multi-protocol label switching (MPLS) L2VPN in service provider environments
- Configure and verify MPLS L3VPN in service provider environments
- Implement IP multicast services
- Describe the QoS architecture and QoS benefits for service provider networks
- Implement QoS in service provider environment
- Implement control plane security in Cisco devices
- Implement management plane security in Cisco devices
- Implement data plane security in Cisco devices
- Describe the YANG data modeling language
- Implement automation and assurance tools and protocols
- Describe the role of Cisco Network Services Orchestrator (NSO) in service provider environments
- Implement virtualization technologies in service provider environment
Target Audience
- Network Administrators
- Network Engineers
- Network Managers
- System Engineers
- Project Managers
- Network Designers
Course Prerequisites
There are no prerequisites for this training. However, the knowledge and skills you are recommended to have before attending this training are:
- Intermediate knowledge of Cisco IOS or IOS XE
- Familiarity with Cisco IOS or IOS XE and Cisco IOS XR software configuration
- Knowledge of IPv4 and IPv6 transmission control protocol (TCP)/IP networking
- Intermediate knowledge of IP routing protocols
- Understanding of MPLS technologies
- Familiarity with VPN technologies
These skills can be found in the following Cisco Learning Offerings:
- Implementing and Administering Cisco Solutions (CCNA)
- Understanding Cisco Service Provided Network Foundations (SPFNDU)
Certification
Associated Certification: CCNP Service Provider, CCIE Service Provider
Associated Exam: 350-501 SPCOR
Other Info
CSCU-LP-SPCOR-V1-028371
Cisco Digital Learning Library